Industrial Ovens

Double walled construction fully made of stainless steel. The gap between the two walls filled with glass wool insulation. Temperature controlled by Microprocessor based digital temp controller with PT 100 as sensor & safety thermostat. Supplied with S. S. wire mesh shelves and silicon gasket on doors.
Temp Range : 50°C to 250 °C accuracy +/-2°C


Optional Accessories

• Forced Air circulating system with fan for better uniformity of Temperature
• S.S wiremesh shelves
• Electronic Digital Timer Range 0 to 999 minutes
• RS 485 for PC communication with Software Meta - Logger
• Single Channel Data logger with printing arrangement

Triple walled in construction inner chamber made of Stainless Steel and exterior made of G. I. Sheets powder coated. The gap between the two walls filled with glass wool insulation. Heating elements fitted on the two sides of the oven . A forced air circulating system with fan for better uniformity of temperature.
Temperature controlled by Electronic Digital Temp Controller.Temp Range : 50°C to 250°C accuracy ±2°C


Optional Accessories

• S.S wiremesh shelves
• Electronic Digital Timer Range 0 to 999 minutes
• RS 485 for PC communication with Software Meta Logger 
• Single Channel Data Logger with Printing Arrangement 

Hot Air Ovens With Digital Temperature Controller - (SILHAO-01)
Double walled construction inner chamber made of mild steel / ST steel and exterior G. I. sheets powder coated. The gap between the two walls filled with glass wool insulation.
Temperature controller by Electronic digital Temp controller cum indicator.Supplied with G.I .wiremesh shelves.
Temperature Range 50°C to 250°C accuracy ±2°C 


Optional Accessories

• Forced Air circulating system with fan for better uniformity of Temperature
• S.S wiremesh shelves 
• Electronic Digital Timer Range 0 to 999 minutes
• RS 485 for PC communication with Software Meta Logger
• Single Channel Data logger with printing arrangement

Triple walled in construction inner chamber made of St. Steel and exterior made of G.I Sheets Powder coated. The gap between the two walls filled glasswool insulation of 4". Heating elements fitted on the three side of the oven. A forced Air Circulating System with fan for better uniformity of temperature.
Temperature Controlled by Electronic Digital Temperature controller.Temp Range : 50°C to 400°C accuracy ±1% of fsd



Optional Accessories

• S.S wiremesh shelves
• Electronic Digital Timer Range 0 to 999 minutes
• RS 485 for PC communication with Software Meta - Logger
• Single Channel Data logger with printing arrangement

a) Hypsometer :- Made of tin, hammertone finish. 
b) Hypsometer :- Made of copper medium size jointless. 
c) Hypsometer :- Made of copper large size Jointless

Double walled construction fully made of stainless steel inner chamber made of thick stainless steel plate. Door made of thick S. S plate and toughened glass in centre to see through the chamber. The gap between the two walls filled with glasswool insulation.
Temperature controlled by Electronic Digital Temp Controller cum indicator.Supplied with S.S tray vacuum gauge, vacuum cock 
Temp Range : 50°C to 200°C accuracy ± 2°C 


Optional Accessories

• Vacuum Pump are available at extra cost
• Electronic Digital Timer Range 0 to 999 minutes
• RS 485 for PC communication with Software Meta - Logger
• Single Channel Data logger with printing arrangement

Double walled construction inner chamber made of thick stainless steel plate and exterior made of G. I. sheets powder coated. Door made of thick plate and toughened glass in center to see through the chamber . The gap between the two walls filled with glass wool insulation.
Salient Features

• Specifically designed for fulfilling various industrial requirements
• Provide excellent vacuum and temperature control
• Ensures high reliability and low leakage rate
• Designed under expert quality team
• Studio material: Cold rolled sheet 
• Usage: Drying, heating under vacuum

Temperature controlled by Electronic Digital Temp controller cum indicator.Supplied with S.S. tray, vacuum gauge, vacuum cock.
Temp Range : 50°C to 200°C accuracy ±2°C 



Optional Accessories

• Electronic Digital Timer Range 0 to 999 minutes
• RS 485 for PC communication with Software Meta - Logger
• Single Channel Data logger with printing arrangement
• Vacuum Pump are available at extra cost.

Double walled construction fully made of stainless steel. Supplied with vacuum gauge, vacuum cock, toughened glass window.
Temperature controlled by Electronic Digital Temp controller.Maximum vacuum 760mm of mercury (-30")



Optional Accessories

• Electronic Digital Timer Range 0 to 999 minutes
• RS 485 for PC communication with Software Meta - Logger
• Single Channel Data logger with printing arrangement
• Single Channel Data logger with printing arrangement
• Vacuum Pump are available at extra cost

These are the Vacuum Oven Round which transfer the power in a motor. They are also called the agitator brushes. Vacuum Oven Round is joint with a air pump and partial vacuum rod to suck up dust from the floor. Vacuum belt which is smoothly connected with cleaner device.
Salient Features

• Double walled construction inner chamber made of stainless steel & exterior made of G.I. sheets powder coated. 
• Gap Between the two walls filled with high grade glass wool insulation
• PID Controller with dual display to view set valve & present valve with auto tuning facility
• Temp. Range 50 C to 200 C with Accuracy of ± 1 C 
• Full toughen glass window to view
• Silicon rubber gasket tuning sealed with door

Optional Accessories

• Electronic Digital Timer Range 0 to 999 minutes
• RS 485 for PC communication with Software Meta - Logger
• Single Channel Data logger with printing arrangement
• Vacuum pump are available at extra cost.

• Material: M.S. Stainless steel. Aluminum with Rubber lining . Polyurethane.
• Interior Diameter: 25 mm to 150 mm
• Brand: Shambhavi Impex
• I Deal In: New Only
• Country of Origin: Made in India

Hydro cyclone is very important for the separation of fine material from the cores material. Usually hydro cyclone is a small Cylindrical conical vessel with involute, inlet and apex. This is very simple unit to handle large volume of slurry with specific size separation. In fact it is replacing spiral classifier in the wet ball mill circuit. Sizes : From 25mm dia. to 150 mm dia.
Salient Features

• Material of Construction:
• M.S.
• Stainless steel.
• Aluminum with Rubber lining .
• Polyurethane.

Additional Information:

• Item Code: MHS-01